[Free] 2018(June) Dumps4cert Microsoft 70-246 Dumps with VCE and PDF Download 111-120

Dumps4cert.com : Latest Dumps with PDF and VCE Files
2018 May Microsoft Official New Released 70-246
100% Free Download! 100% Pass Guaranteed!

Monitoring and Operating a Private Cloud with System Center 2012

Question No: 111 – (Topic 8)

Your company has a private cloud that is managed by using a System Center 2012 infrastructure.

The network contains an Operations Manager infrastructure and a Virtual Machine Manager (VMM) infrastructure.

The private cloud contains a clustered VMM solution that has two virtualization hosts. The VMM solution hosts seven virtual machines.

The virtual machines are configured as shown in the following table.

Dumps4Cert 2018 PDF and VCE

You configure Dynamic Optimization to use the following settings:

->A CPU Dynamic Optimization threshold of 30 percent

->A CPU host reserve threshold of 15 percent

->Low aggressiveness

You monitor the VMM solution and discover that the virtual machines rarely migrate from Server1 to Server2 when CPU utilization exceeds the configured threshold.

You need to increase the likelihood of the virtual machines migrating from Server1 to Server2 when CPU utilization exceeds the configured threshold.

What should you do?

  1. set the Aggressiveness to High.

  2. Enable Power Optimization.

  3. Configure a host profile.

  4. Modify the CPU host reserve threshold.

Answer: A Explanation:

http://blogs.technet.com/b/scvmm/archive/2011/05/04/dynamic-optimization-and- poweroptimization-in-scvmm-2012.aspx

Good post here:

What have you configured regarding the dynamic optimization? How aggressive is the treshold for optimizing your cluster? First of all, you must check the option quot;Automatically migrate virtual machines to balance loadquot;.

Second, specify how aggressive the optimization should be.

The more agressive, the more likely to live migrate VMs even for small gain.

Last, you can also configure the resource treshold for when optimization should kick in. Default it`s set to 30% CPU and 512 MB RAM.

To test and verify, right click on your cluster, and click quot;optimize hostsquot;.

VMM will check if it`s anything to gain, on demand, and eventually live migrate VMs to balance the load.

http://social.technet.microsoft.com/Forums/en- US/virtualmachingmgrhyperv/thread/45dfd50da2a4-4a7a-9c88-53fd7cedda77

Question No: 112 – (Topic 8)

Your company has a private cloud that contains a System Center 2012 Service Manager infrastructure.

You need to create a service level objective (SLO) for incidents that have a priority value of 1.

What should you create first?

  1. A rule

  2. A service template

  3. A queue

  4. A channel

Answer: C Explanation:

Queues are used in SCSM 2012 SLA Management to apply the SLA to a group of work items.

http://blogs.technet.com/b/servicemanager/archive/2012/01/25/scsm-2012-service-level- management.aspx

Question No: 113 HOTSPOT – (Topic 8)

Your company has a private cloud that is managed by using a System Center 2012 infrastructure.

You plan to deploy a single-tier service to the private cloud.

The service is configured to use Network Load Balancing (NLB).

You need to create a Hardware Profile for the virtual machines that will be added to the service template.

The solution must ensure that the virtual machines will use Windows Network Load Balancing.

Which settings should you configure in the Hardware Profile? To answer, configure the four appropriate settings in the dialog box in the answer area.

Dumps4Cert 2018 PDF and VCE

Answer:

Dumps4Cert 2018 PDF and VCE

Dumps4Cert 2018 PDF and VCE

Explanation:

Connected to Logical Network Static IP (from a static IP Pool) Static Mac Address

Check quot;Enable spoofing of MAC addressesquot; http://technet.microsoft.com/en-us/library/hh335098.aspx

The only potential issue is that when using System Center 2012 without SP1 checking the quot;Enable spoofing of MAC Addressesquot; doesn#39;t actually enable it. It has a bug: Instead it must be done from the command line but the question doesn#39;t mention what SP your System Centre is at.

Question No: 114 – (Topic 8)

Our company has a main office and 10 branch offices.

The network contains an Active Directory forest named contoso.com. Each office contains domain controllers.

You have a System Center 2012 R2 infrastructure that has Operations Manager and Service Manager installed.

Each office has multiple VLANs. All switches are managed switches.

Users in the branch offices occasionally call the help desk to report that they cannot access some of the network resources in the main office.

You need to ensure that all of the ports on the switches can be monitored by using Operations Manager.

What is the best configuration to achieve the goal? More than one answer choice may achieve the goal. Select the BEST answer.

  1. A recursive discovery for the network devices by using ICMP

  2. An explicit discovery for the network devices by using ICMP

  3. A recursive discovery for the network devices by using SNMP

  4. An explicit discovery for the network devices by using SNMP

Answer: D

Question No: 115 – (Topic 8)

Your role of Systems Administrator at ABC.com includes the management of the company#39;s private cloud.

The company has a System Center 2012 infrastructure that includes System Center 2012 – Service Manager (SCSM).

You use Service Manager for Service Level Management.

You need to create a service level objective (SLO) in Service Manager for incidents that

meet the following criteria:

Priority = 1 Incident Category = Email Problem

Assigned User = Empty

What should be your first step?

  1. You should first create a Service Template.

  2. You should first create a Connector.

  3. You should first create a Queue.

  4. You should first create a Query.

Answer: C Explanation: C.

SLO needs queue first (queue creates the relationship between incident type, priority and metric/escalation path) here is additional information to support the answer C (queue). The first paragraph under quot;Queue:quot; seems to reference this question directly. http://blogs.technet.com/b/servicemanager/archive/2012/01/25/scsm-2012-service-level- management.aspx

quot;Queues:

With queues you can group different work items in Service Manager (SCSM 2010 and SCSM 2012) by criteria.

For instance: All Incidents with Priority 2 AND Incident Category 鈥濵ail Problem” AND Assigned User is empty.

Queues are used in SCSM 2012 SLA Management to apply the SLA to a group of work items.

SCSM 2012 console -gt; Library -gt; Queuesquot;

Question No: 116 HOTSPOT – (Topic 8)

Select what update method to use with VMM. (select either VMM Baseline update or Configuration Manager): make you vmm update method as much as possible

Dumps4Cert 2018 PDF and VCE

Dumps4Cert 2018 PDF and VCE

Answer:

Dumps4Cert 2018 PDF and VCE

Question No: 117 – (Topic 8)

Your company has a datacenter in Los Angeles.

The datacenter contains a private cloud that is managed by using a System Center 2012 infrastructure.

The infrastructure has the System Center 2012 Service Manager Self-Service Portal installed.

You create a new service offering.

You need to ensure that only three users named Admin1, Admin2, and Admin3 can access the service offering.

What should you do?

  1. Add the service offering and the request offering to a Service Manager group, and then create a Run As Account.

  2. Add the Admin1, Admin2, and Admin3 configuration items to a Service Manager group, and then create a Run As Account.

  3. Add the service offering and the request offering to a Service Manager group, and then create a User Role.

  4. Add the Admin1, Admin2, and Admin3 configuration items to a Service Manager group, and then create a User Role.

    Answer: D Explanation:

    With Role based security scoping in SCSM there is the possibility to configure a controlled environment for different service roles.

    A SCSM role profile is a configuration set to define access to objects, views in the console, operations they can perform and members of the role (AD User/Group).

    SCSM components of a User role are:

    The security scope: Is the security boundary in SCSM.

    Boundaries can be set on Group/queue, Class, Property amp; relationships.

    UI filter scope: This filter is for defining what an operator can see in the SCSM console. Limiting the options visible in the console improves the usability.

    UI filters can be set on console tasks, templates and views.

    User role profile: SCSM includes some predefined user profiles who include a set of allowed operations with a class/property/relationship scope over objects.

    User Assignment: The members of the user role in SCSM. This can be set for users or groups.

    (Always recommended to use groups) http://scug.be/scsm/2010/03/21/service-manager-role-based-security-scoping

    Question No: 118 DRAG DROP – (Topic 8)

    Your company has a private cloud that is managed by using a System Center 2012 Operations Manager infrastructure.

    You need to ensure that members of a group named Group1 can resolve printing alerts by using the Operations Manager console. The solution must minimize the number of Operations Manager permissions assigned to Group1.

    Which three actions should you perform in sequence? (To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.)

    Dumps4Cert 2018 PDF and VCE

    Answer:

    Dumps4Cert 2018 PDF and VCE

    Explanation:

    Import the print server management pack Create an operator user role

    Scope the user role

    1. Import the Windows Server Print Server Management Pack – Required for monitoring printing

      http://technet.microsoft.com/en-us/library/cc181012.aspx

    2. Create an Operator User Role – Required to add Group1 to SCOM

    3. Scope the User Role – To set this role to access print alerts only

      No – Create an event viewer alert, technically feasible to set logging of print queues and then monitor events but Microsoft always asked for the BEST solution, hence the Print MP No – Create a Subscription, there is no mention of notifications in the question

      No – Create a run as account, the question says resolve the print ALERT not the fault itself

      Question No: 119 – (Topic 8)

      Your company has a datacenter in Los Angeles.

      The datacenter contains a private cloud that is managed by a System Center 2012 Virtual Machine Manager (VMM) infrastructure.

      The infrastructure contains two management servers and 10 Hyper-V hosts.

      You configure VMM to use an update server and to synchronize the updates by using a windows Server

      Update Services (WSUS) server named WSUS1.

      You attempt to verify compliance with the Sample Baseline for Security Updates. You view the console as shown in the exhibit. (Click the Exhibit button.)

      Dumps4Cert 2018 PDF and VCE

      You need to ensure that you can verify compliance for all of the Hyper-V hosts. What should you modify?

      1. the update classifications of the update server

      2. the Assignment Scope of the baseline

      3. the default configuration provider

      4. the Network settings of the All Hosts host group

Answer: B Explanation:

In the VMM console, open the Fabric workspace.

On the Home tab, in the Add group, click Add Resources, and then click Update Server. The Add Windows Server Update Services Server dialog box opens.

In Computer name, enter the fully qualified domain name (FQDN) of the WSUS server (for example, VMMServer01.contoso.com).

Specify which TCP/IP port that the WSUS website listens on for connections (for example, port 8530).

Enter credentials for connecting to the WSUS server.

The account must have administrator rights on the WSUS server.

If necessary, select the Use Secure Socket Layer (SSL) to communicate with the WSUS server and client#39;s check box.

Click Add.

The WSUS server will be added to VMM, followed by initial synchronization of the updates catalog.

Depending on how many update classifications and products you chose when you installed the WSUS server, this operation can take a long time, depending on such factors as network traffic and the load on the WSUS server.

To find out the status of the operation, monitor the status of the Add Update Server and Synchronize Update Server jobs in the Jobs window or in the Jobs workspace.

Note

After you enable update management in VMM, you should manage the WSUS server only through VMM, unless you are using a WSUS server in a Configuration Manager environment.

To verify that the WSUS server was added to VMM successfully:

In the Fabric workspace, on the Fabric pane, expand Servers, and click Update Server. The results pane should display the WSUS server.

In the Library workspace, on the Library pane, expand Update Catalog and Baselines, and then click Update Catalog.

The results pane should display the updates that were downloaded during WSUS synchronization.

Question No: 120 – (Topic 8)

Your company has a datacenter in Los Angeles.

The datacenter contains a private cloud that is managed by using a System Center 2012 infrastructure.

A server named VMM1 hosts the System Center 2012 Service Manager management server. A server named Server2 hosts the System Center 2012 Orchestrator management server.

You plan to use a runbook named Book1 to update the status of Service Manager incidents.

You need to ensure that you can create Book1, and then reference the runbook in Service Manager.

What should you do? (Each correct answer presents part of the solution. Choose all that apply.)

  1. From the Service Manager Console, add an incident event workflow.

  2. From the Service Manager Shell, run the Set-SCDWJobSchedulecmdlet.

  3. From the Orchestrator Deployment Manager, register the Integration Pack for System Center Service Manager.

  4. From the Service Manager Console, create an Orchestrator connector.

  5. From the System Center 2012 Orchestrator Runbook designer, create a connection.

  6. From the Service Manager Shell, run the Enable-SCDWJobSchedulecmdlet.

Answer: C,D,E Explanation:

Install the integration pack for SCSM on Orchestrator and configure the connection settings (SCSM server name, User, Password)

Create a new runbook

First activity -gt; quot;Monitor Objectquot; of SCSM integration pack -gt; Incident Class -gt; On Update –

gt; Filter quot;Support Groupquot; not equal quot;Tier 1quot;

Add 6 quot;Send Emailquot; activities -gt; 6 different recipients -gt; add the text in each mail body Link all 6 quot;Send Emailquot; activities with the first quot;Monitor Objectquot; activity

On each link delete the default rule quot;On successquot;

Add a new criteria -gt; Choose the quot;Support Groupquot; from the data bus -gt;criteria of the first link quot;Support Groupquot; equals quot;Tier 2quot;

Do the same with the other Links and Support Groups.

Check in and start the runbook http://social.technet.microsoft.com/Forums/en/administration/thread/ea41a3a4-0b40-47ee- 9ecc-a2ecab8794bf

To create an Orchestrator connector

In the Service Manager console, click Administration.

In the Administration pane, expand Administration, and then click Connectors.

In the Tasks pane, under Connectors, click Create Connector, and then click Orchestrator connector.

Perform these steps to complete the Orchestrator Connector Wizard: On the Before You Begin page, click Next.

On the General page, in the Name box, type a name for the new connector. Make sure that Enable this connector is selected, and then click Next.

On the Connection page, in the Server Information area, type the URL of the Orchestrator Web service, depending on which version of Orchestrator you are using:

For Orchestrator Beta, type the URL of the Orchestrator Web service in the form of http://lt;computergt;:lt;portgt;/

Orchestrator.svc, where lt;computergt; is the name of the computer hosting the web service and lt;portgt; is the

port number where the web service is installed. (The default port number is 81.) For Orchestrator RC, type the URL of the Orchestrator Web service in the form of http://lt;computergt;:lt;portgt;/

Orchestrator2012/Orchestrator.svc, where lt;computergt; is the name of the computer hosting the web service and lt;portgt; is the port number where the web service is installed. (The default port number is 81.)

On the Connection page, in the Credentials area, either select an existing account or click New, and then do the following:

In the Run As Account dialog box, in the Display name box, type a name for the Run As account. In the Account list, select Windows Account. Enter the credentials for an account that has rights to connect Orchestrator, and then click OK. On the Connection page, click Test Connection.

Note

Special characters (such as the ampersand [amp;]) in the User Name box are not supported. In the Test Connection dialog box, make sure that the message “The connection to the server was successful” appears, and then click OK. On the Connection page, click Next.

On the Folder page, select a folder, and then click Next.

On the Web Console URL page, type the URL for the Orchestrator web console in the form of http://lt;computergt;:port (the default port number is 82), and then click Next.

On the Summary page, make sure that the settings are correct, and then click Create.

On the Completion page, make sure that you receive the message “Orchestrator connector successfully created,” and then click Close.

To validate the creation of an Orchestrator connector

In the Connectors pane, locate the Orchestrator connector that you created. Review the Status column for a status of Finished Success.

Note

Allow sufficient time for the import process to finish if you are importing a large number of runbooks.

In the Service Manager console, click Library.

In the Library pane, expand Library, and then click Runbooks.

Review the Runbooks pane, and note that your runbooks have been imported. http://technet.microsoft.com/en-us/library/hh519779.aspx

The Integration Pack for System Center Service Manager is an add-in for Opalis Integration Server 6.3 that enables you to use System Center Service Manager to coordinate and use operational data in an existing IT environment comprised of service desk systems, configuration management systems,, and event monitoring systems,, including specifically BMC Remedy IT Service Management Suite, BMC Atrium, and HP Service Manager 7 and HP Service Center 6.2.

With this integration pack, you can also create workflows that interact with and transfer information to the integration packs for System Center Operations Manager, System Center Data Protection Manager, System Center Configuration Manager, and System Center Virtual Machine Manager.

Opalis, a Microsoft Subsidiary, is committed to helping you protect your privacy, while delivering software that brings you the performance, power, and convenience you want. For more information, seetheOpalis 6.3

Privacy Statement (http://go.microsoft.com/fwlink/?LinkID=202690). http://technet.microsoft.com/en-us/library/gg464964.aspx

100% Dumps4cert Free Download!
Download Free Demo:70-246 Demo PDF
100% Dumps4cert Pass Guaranteed!
Download 2018 Dumps4cert 70-246 Full Exam PDF and VCE

Dumps4cert ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

Leave a Reply

Your email address will not be published. Required fields are marked *

  • Categories

  • Tags

  • Hot Exams

  • Hot Exams

  • Hot Catageories

  • microsoft dumps

    62-193 Dumps
    70-243 Dumps
    70-246 Dumps
    70-247 Dumps
    70-331 Dumps
    70-332 Dumps
    70-333 Dumps
    70-334 Dumps
    70-339 Dumps
    70-341 Dumps
    70-342 Dumps
    70-345 Dumps
    70-346 Dumps
    70-347 Dumps
    70-348 Dumps
    70-354 Dumps
    70-355 Dumps
    70-357 Dumps
    70-383 Dumps
    70-384 Dumps
    70-385 Dumps
    70-398 Dumps
    70-410 Dumps
    70-411 Dumps
    70-412 Dumps
    70-413 Dumps
    70-414 Dumps
    70-417 Dumps
    70-461 Dumps
    70-462 Dumps
    70-463 Dumps
    70-464 Dumps
    70-465 Dumps
    70-466 Dumps
    70-467 Dumps
    70-469 Dumps
    70-470 Dumps
    70-473 Dumps
    70-475 Dumps
    70-480 Dumps
    70-481 Dumps
    70-482 Dumps
    70-483 Dumps
    70-484 Dumps
    70-485 Dumps
    70-486 Dumps
    70-487 Dumps
    70-488 Dumps
    70-489 Dumps
    70-490 Dumps
    70-491 Dumps
    70-492 Dumps
    70-494 Dumps
    70-496 Dumps
    70-497 Dumps
    70-498 Dumps
    70-499 Dumps
    70-517 Dumps
    70-532 Dumps
    70-533 Dumps
    70-534 Dumps
    70-535 Dumps
    70-537 Dumps
    70-640 Dumps
    70-642 Dumps
    70-646 Dumps
    70-673 Dumps
    70-680 Dumps
    70-681 Dumps
    70-682 Dumps
    70-684 Dumps
    70-685 Dumps
    70-686 Dumps
    70-687 Dumps
    70-688 Dumps
    70-689 Dumps
    70-692 Dumps
    70-694 Dumps
    70-695 Dumps
    70-696 Dumps
    70-697 Dumps
    70-698 Dumps
    70-703 Dumps
    70-705 Dumps
    70-713 Dumps
    70-734 Dumps
    70-735 Dumps
    70-740 Dumps
    70-741 Dumps
    70-742 Dumps
    70-743 Dumps
    70-744 Dumps
    70-745 Dumps
    70-761 Dumps
    70-762 Dumps
    70-764 Dumps
    70-765 Dumps
    70-767 Dumps
    70-768 Dumps
    70-773 Dumps
    70-774 Dumps
    70-775 Dumps
    70-776 Dumps
    70-778 Dumps
    70-779 Dumps
    70-980 Dumps
    70-981 Dumps
    70-982 Dumps
    74-343 Dumps
    74-344 Dumps
    74-409 Dumps
    74-678 Dumps
    74-697 Dumps
    77-418 Dumps
    77-419 Dumps
    77-420 Dumps
    77-421 Dumps
    77-422 Dumps
    77-423 Dumps
    77-424 Dumps
    77-425 Dumps
    77-426 Dumps
    77-427 Dumps
    77-428 Dumps
    77-600 Dumps
    77-601 Dumps
    77-602 Dumps
    77-603 Dumps
    77-604 Dumps
    77-605 Dumps
    77-725 Dumps
    77-726 Dumps
    77-727 Dumps
    77-728 Dumps
    77-729 Dumps
    77-730 Dumps
    77-731 Dumps
    77-853 Dumps
    77-881 Dumps
    77-882 Dumps
    77-883 Dumps
    77-884 Dumps
    77-885 Dumps
    77-886 Dumps
    77-887 Dumps
    77-888 Dumps
    77-891 Dumps
    98-349 Dumps
    98-361 Dumps
    98-362 Dumps
    98-363 Dumps
    98-364 Dumps
    98-365 Dumps
    98-366 Dumps
    98-367 Dumps
    98-368 Dumps
    98-369 Dumps
    98-372 Dumps
    98-373 Dumps
    98-374 Dumps
    98-375 Dumps
    98-379 Dumps
    98-380 Dumps
    98-381 Dumps
    98-382 Dumps
    98-383 Dumps
    98-388 Dumps
    AZ-100 Dumps
    AZ-101 Dumps
    AZ-102 Dumps
    INF-203x Dumps
    INF-204x Dumps
    INF-205x Dumps
    INF-206x Dumps
    MB2-700 Dumps
    MB2-701 Dumps
    MB2-702 Dumps
    MB2-703 Dumps
    MB2-704 Dumps
    MB2-706 Dumps
    MB2-707 Dumps
    MB2-708 Dumps
    MB2-709 Dumps
    MB2-710 Dumps
    MB2-711 Dumps
    MB2-712 Dumps
    MB2-713 Dumps
    MB2-714 Dumps
    MB2-715 Dumps
    MB2-716 Dumps
    MB2-717 Dumps
    MB2-718 Dumps
    MB2-719 Dumps
    MB2-877 Dumps
    MB5-705 Dumps
    MB6-700 Dumps
    MB6-701 Dumps
    MB6-702 Dumps
    MB6-703 Dumps
    MB6-704 Dumps
    MB6-705 Dumps
    MB6-884 Dumps
    MB6-885 Dumps
    MB6-886 Dumps
    MB6-889 Dumps
    MB6-890 Dumps
    MB6-892 Dumps
    MB6-893 Dumps
    MB6-894 Dumps
    MB6-895 Dumps
    MB6-896 Dumps
    MB6-897 Dumps
    MB6-898 Dumps